GPT-3000 SERIES - FLT Geosystems

6 SPECIAL MODE (Menu Mode)3 Press the [F3](YES) key.4 Press the [F1] (INPUT) key and enter Elevation.*1) Press the [F4](ENT) key.[F3][F1]Enter ELEV.[F4]GRID FACTORELEV.→1000 mSCALE:0.999000INPUT ––– ––– ENTER1234 5678 90. –[ENT]5 Enter Scale Factor in the same way. [F1]Enter Scale[F4]Grid Factor is displayed for 1 to 2 second anddisplay returns to menu.GRID FACTORELEV.:2000 mSCALE→1.001000INPUT ––– ––– ENTERGRID FACTOR=1.000686*1) Refer to Section 2.6 “How to Enter Alphanumeric characters”.● Input Range :Elevation : –9,999 to +9,999 meter (–32,805 to +3,2805 ft, ft+in)Scale Factor: 0.990000 to 1.0100006.3 Setting Illumination of Display and Cross HairsSetting ON/OFF/LEVEL (1 to 9) for illumination of display (LCD) and reticle.Setting LEVEL (1 to 9) is only for reticle.[Example setting] LEVEL:2 and turn on the illumination.Operating procedure Operation Display1 After pressing the [MENU] key, press the [F4](P↓)key to get the menu on page 2.[MENU][F4]MENU 2/3F1:PROGRAMSF2:GRID FACTORF3:ILLUMINATION P↓2 Press the [F3] key.The data previously set is shown.3 Press the [F3](LEVEL) key.4 Press the [F2](↑) key, and then press the[F4](ENTER) key.[F3][F3][F2][F4]ILLUMINATION [OFF:1]F1:ONF2:OFFF3:LEVELILLUMINATION [OFF:1][LEVEL MODE]↓ ↑ ––– ENTERILLUMINATION [OFF:2]F1:ONF2:OFFF3:LEVEL5 Press the [F1](ON) key. [F1]ILLUMINATION [ON:2]F1:ONF2:OFFF3:LEVEL●To return to previous mode, press the [ESC] key.6-17