GPT-3000 SERIES - FLT Geosystems

3 ANGLE MEASUREMENT3.3.2 Setting a Horizontal Angle from the KeysMake sure the mode is Angle measurement.Operating procedure Operation Display1 Collimate the target. CollimateV : 90°10'20"HR: 170°30'20"0SET HOLD HSET P1↓2 Press the [F3](HSET) key. [F3]H ANGLE SETHR:3 Input the required horizontal angle byusing keys. *1)For example :70°40'20"When completed, normal measuring from therequired Horizontal angle is possible.[F1]70.4020[F4]INPUT --- --- ENTER1234 5678 90.-[ENT]V : 90°10'20"HR: 70°40'20"0SET HOLD HSET P1↓*1) To enter Alphanumeric characters, see Section 2.6 “ How to Enter Alphanumeric characters” .3.4 Vertical Angle Percent Grade(%) ModeMake sure the mode is Angle measurement.Operating procedure Operation Display1 Press the [F4](↓) key to get the function on page 2. [F4]V : 90°10'20"HR: 170°30'20"0SET HOLD HSET P1↓TILT REP V% P2↓2 Press the [F3](V%) key. *1) [F3]V : -0.30 %HR: 170°30'20"TILT REP V% P2↓*1) Every time pressing the [F3](V%) key, the display mode switches.● When the measurement is carried out over ±45° (±100%) from the horizontal, the display shows.3-3