GPT-3000 SERIES - FLT Geosystems

1.3 Operating Key1 NOMENCLATURE AND FUNCTIONSKeys Name of Key FunctionStar keyCoordinatemeas.keyDistance meas.keyStar key mode is used for each presetting or displaying as follows.1 Contrast of the display 2 Reticle illumination 3 Back Light4 Non-prism/Prism 5 Laser pointer 6 Laser plummet7 Tilt correction 8 Point guide 9 Set audio modeCoordinate measurement modeDistance measurement modeANG Angle meas.key Angle measurement modeMENUESCMenu keyEscape keySwitches menu mode and normal mode. To set application measurementsand adjust in the menu mode.● Returning to the measurement mode or previous layer mode from themode set.● To be DATA COLLECTION mode or LAYOUT mode directly from thenormal measurement mode.● It is also possible to use as Record key in normal measurement mode.To select function of Escape key, see Chapter 16 “SELECTING MODE”.ENT Enter key Press at the end of inputting values.POWER Power source key ON/OFF of power sourceF1–F4Soft key( Function key)Responds to the message displayed.1-4