GPT-3000 SERIES - FLT Geosystems

9.7 Data Communications9 MEMORY MANAGER MODEYou can send a data file stored in the internal memory to a computer directly. Also, you can directly loada coordinate data file and PCODE Library data to the internal memory from the computer.9.7.1 Sending DataExample: Sending a Measured data fileOperating procedure Operation Display1 Press the [F3](MEMORY MGR.) key from the[F3] MEMORY MGR. 1/3menu 1/3.F1:FILE STATUSF2:SEARCHF3:FILE MAINTAN P↓2 Press the [F4](P↓) key twice. [F4][F4]3 Press the [F1](DATA TRANSFER) key . [F1]MEMORY MGR. 3/3F1:DATA TRANSFERF2:INITIALIZEDATA TRANSFERF1:GTS FORMATF2:SSS FORMATP↓4 Select data format.GTS format: The conventional dataSSS format: Including PCODE data , ‘From‘ and‘To‘ data for Point to Line.[F1]DATA TRANSFERF1:SEND DATAF2:LOAD DATAF3:COMM. PARAMETERS5 Press the [F1] key. [F1]SEND DATAF1:MEAS. DATAF2:COORD. DATAF3:PCODE DATA6 Select the type of data to send by pressing [F1]-[F3] key.Example : [F1](MEAS. DATA)7 Press the [F1](INPUT) key and enter File Nameyou want to send. Press the [F4](ENT) key. *1),2)8 Press the [F3](YES) key .*3)The sending starts.The display will return to menu.[F1][F1]Enter FN[F4][F3]SELECT A FILEFN:_________INPUT LIST ––– ENTERSEND MEAS. DATA>OK ?––– ––– [YES][NO]SEND MEAS. DATA< Sending Data!>STOP*1) Refer to Section 2.6 “How to Enter Alphanumeric characters”.*2) To scroll the data, press the [ ]or[ ] key.● To show the file list, press the [F2](LIST) key.*3) To cancel the sending, press the [F4](STOP) key.9-14