GPT-3000 SERIES - FLT Geosystems

7 DATA COLLECTION7.6 Editing PCODE Library [PCODE INPUT]PCODE data can be entered into PCODE Library in this mode.A PCODE is liked with a number of 1 to 50.PCODE can be also edited in MEMORY MANAGER menu 2/3 in the same way.Operating procedure Operation DisplayDATA COLLECT 2/2F1:SELECT A FILEF2:PCODE INPUTF3:CONFIG. P↓1 Press the [F2](PCODE INPUT) key from DataCollect menu 2/2.2 By pressing the following keys, the list will increaseor decrease.[ ] or[ ] : Increasing or Decreasing one by one[ ]or[ ] : By ten Increasing or Decreasing.[F2][ ]or[ ][ ]or[ ]→001:TOPCON002:TOKYOEDIT ––– CLR –––011:URAH→012:AMIDAT013:HILLTOEDIT ––– CLR –––3 Press the [F1](EDIT) key. [F1]4 Enter PCODE and press the [F4](ENT) key. *1) EnterPCODE[F4]011:URAH→012=AMIDAT013:HILLTO1234 5678 90.– [ENT]011:URAH→012:AMISUN013:HILLTOEDIT ––– CLR –––*1) Refer to Section 2.6 “How to Enter Alphanumeric characters”.7-20