GPT-3000 SERIES - FLT Geosystems

7.1 Preparation7 DATA COLLECTION7.1.1 Selecting a File for Data CollectionA file used by data collection mode must be selected at first.Select a file before beginning data collection mode because selection screen of a file is displayed. Anda selection from data collection menu is possible in the mode.Operating procedure Operation DisplayMENU 1/3F1:DATA COLLECTF2:LAYOUTF3:MEMORY MGR. P↓1 Press [F1](DATA COLLECT) key from menu 1/3. [F1]SELECT A FILEFN:_________INPUT LIST ––– ENTER2 Press [F2](LIST) key to display the list of file. *1) [F2]AMIDATA /M0123→*HILDATA /M0345TOPDATA /M0789––– SRCH ––– ENTER3 Scroll file list by pressing [ ] or [ ] key andselect a file to use. *2),3)4 Press [F4](ENTER) key.The file will be set and data collect 1/2 menu willbe shown.[ ] or [ ][F4]TOPDATA /M0789→RAPDATA /M0564SATDATA /M0456––– SRCH ––– ENTERDATA COLLECT 1/2F1:OCC.PT# INPUTF2:BACKSIGHTF3:FS/SS P↓*1) If you want to make a new file or input file name directly, press [F1](INPUT) key and enter a file name.*2) When a file has been selected already, '*' mark is indicated on left of current file name.*3) Data in a file shown with arrow can be searched by pressing [F2](SRCH) key.●It is possible to select a file from DATA COLLECT 2/2 menu in thesame way.DATA COLLECT 2/2F1:SELECT A FILEF2:PCODE INPUTF3:CONFIG. P↓7-3