GPT-3000 SERIES - FLT Geosystems

4 DISTANCE MEASUREMENTThe horizontal distance from the instrument to theprism will be measured.5 Collimate point A 0 using the horizontal motionclamp and horizontal tangent screw.6 Show the relative elevation of point A 0 .CollimateA 0[ ]OFFSET-MEASUREMENTHR: 110°20'30"HD: 56.789 mNEXT --- --- ---OFFSET-MEASUREMENTHR: 113°30'50"HD: 56.789 mNEXT --- --- ---OFFSET-MEASUREMENTHR: 113°20'30"VD: 3.456 mNEXT --- --- ---7 Show the slope distance of point A 0 .● Each time pressing the [ ] key, horizontaldistance, relative elevation and slope distance areshown in sequence.8 Show N coordinate of point A 0 or A 1 .● Each time pressing [ ] key, N,E and Zcoordinate are shown in sequence.[ ][ ]● To return to procedure 4, press the [F1](NEXT) key.● To return to the previous mode, press the [ESC] key.● To select the Non-prism or Prism mode, press the [F3](NP/P) key after the step 4.OFFSET-MEASUREMENTHR: 113°20'30"SD: 56.894 mNEXT --- --- ---OFFSET-MEASUREMENTHR: 113°20'30"N : -12.345 mNEXT --- --- ---4-8