GPT-3000 SERIES - FLT Geosystems

2.6 How to Enter Alphanumeric characters2 PREPARATION FOR MEASUREMENTThis enables you to enter alphanumeric characters such as the instrument height, prism height,occupied point, backsight point etc..● How to select a item[Example setting] Occupied point in the data collection mode.The arrow indicates a item to enter.The arrow line moves up or down when the[ ] key or [ ] key is pressed.PT# →ST-01ID :INS.HT: 0.000 mINPUT SRCH REC OCNEZ[ ]or[ ]PT# :ST-01ID →INS.HT: 0.000 mINPUT SRCH REC OCNEZPT# :ST-01ID :INS.HT→ 0.000 mINPUT SRCH REC OCNEZ● How to enter characters1 Move the arrow to enter a item using th e []or [ ] key.2 Press the [F1] (INPUT) key.The arrow changes to the equal (=) .The characters are displayed on the bottomline.3 Press the [ ] or [ ] key to select a page.PT# →ID :INS.HT: 0.000 mINPUT SRCH REC OCNEZPT# =ID :INS.HT: 0.000 m1234 5678 90.- [ENT]ABCD EFGH IJKL [ENT]MNOP QRST UVWX [ENT]YZ+#[SPC][CLR][ENT][F1] [F2] [F3] [F4]4 Press the soft key to select a group ofcharacters.Example: [F2](QRST) key is pressed.PT# =ID :INS.HT: 0.000 m(Q) (R) (S) (T)[F1] [F2] [F3] [F4]2-7