GPT-3000 SERIES - FLT Geosystems

2) Z Coordinate Calculation from Known Point Measuring Data[Example setting] Using coordinate data file6 SPECIAL MODE (Menu Mode)Operating procedure Operation Display1 After pressing [MENU] key, press [F4](P↓) key toget the menu on page 2.[MENU][F4]MENU 2/3F1:PROGRAMSF2:GRID FACTORF3:ILLUMINATION P↓2 Press the [F1] key. [F1]3 Press the [F3](Z COORD.) key. [F3]PROGRAMS 1/2F1:REMF2:MLMF3:Z COORD. P↓Z COORD.SETTINGF1:USE FILEF2:DON’T USE4 Press the [F1](USE FILE) key.5 Press the [F1](INPUT) key and enter the FileName.[F1][F1]Enter FN[F4]SELECT A FILEFN:_________INPUT LIST ––– ENTERZ COORD.SETTINGF1:OCC.PT INPUTF2:REF.MEAS6 Press the [F2] key. [F2]NOO1#PT#:_________7 Press the [F1](INPUT) key and enter the PointNumber in coordinate data file.8 Press the [F3](YES) key and enter the PointNumber in coordinate data file.[F1]Enter PT#[F4][F3]INPUT LIST NEZ ENTERN: 4.356 mE: 16.283 mZ: 1.553 m>OK ? [YES][NO]REFLECTOR HEIGHTINPUTR.HT: 0.000 mINPUT ––– ––– ENTER9 Press the [F1](INPUT) key and enter the height. [F1]Enter R. HT[F4]REFLECTOR HEIGHTINPUTR.HT: 0.000 mMEAS ––– NP/P –––10 Collimate a prism on the point and press the[F1](MEAS) key.Measuring starts. *1)Collimate P[F1]HR: 120°30'40"HD*[n] Measuring...6-9