GPT-3000 SERIES - FLT Geosystems
GPT-3000 SERIES - FLT Geosystems
GPT-3000 SERIES - FLT Geosystems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6.4 Setting Mode 1In this mode, the following settings are possible.1. Setting Minimum Reading2. Auto Power off3. Vertical and Horizontal Angle Tilt Correction (Tilt ON/OFF)(<strong>GPT</strong>-3007 has vertical angle tilt correction only.).4. Systematic Error of Instrument Correction (<strong>GPT</strong>-3002/3003/3005)5. Selecting battery type6. Heater ON/OFF7. Setting for RS-232C communication● This setting is memorized after power off.6 SPECIAL MODE (Menu Mode)6.4.1 Setting Minimum ReadingSelect minimum display unit for angle measurement, coarse distance measurement mode.● To select minimum display for fine measurement mode, see Chapter 16 “SELECTING MODE” .Models Angle Unit Coarse modeDegree GON MILDistance unit<strong>GPT</strong>-3002<strong>GPT</strong>-3003 5" / 1" 1mgon / 0.2mgon 0.1mil / 0.01mil<strong>GPT</strong>-300510mm (0.02ft)/1mm(0.005ft)<strong>GPT</strong>-3007 10" / 5" 2mgon / 1mgon 0.1mil / 0.01mil[Example] Minimum angle : 5”, Coarse : 1mmOperating procedure Operation Display1 After pressing the [MENU] key, press the [F4](P↓)key twice to get the menu on page 3.[MENU][F4][F4]MENU 3/3F1:PARAMETERS 1F2:CONTRAST ADJ.P↓2 Press the [F1] key. [F1]3 Press the [F1] key. [F1]PARAMETERS 1 1/3F1:MINIMUM READINGF2:AUTO POWER OFFF3:TILTP↓MINIMUM READINGF1:ANGLEF2:COARSE4 Press the [F1] key. [F1]MINIMUM ANGLE[F1: 1" ]F2: 5"ENTER5 Press the [F2](5") key and press the [F4](ENTER)key.[F2][F4]MINIMUM READINGF1:ANGLEF2:COARSE6 Press the [F2] key. [F2]COARSE READINGF1: 1mm[F2:10mm]ENTER6-18
Change language