GPT-3000 SERIES - FLT Geosystems

8 LAYOUT6 Press the [F4](ENTER) key.The file will be set .7 Press the [F1](INPUT) key, and enter the newpoint name. *4)Press the [F4](ENT) key.[F4][F1]Enter PT#[F4]SIDE SHOTPT#:INPUT SRCH ––– ENTERREFLECTOR HEIGHTINPUTR.HT : 0.000 mINPUT ––– ––– ENTER8 Enter reflector height in the same way. [F1]Enter R.HT[F4]REFLECTOR HEIGHTINPUTR.HT : 1.235 mMEAS --- NP/P ---9 Collimate the new point, and press the [F1](MEAS) key.Distance measuring starts.10 Press the [F3](YES) key.*5)The name and coordinate value are stored intoCOORD.DATA.The input menu for next new point is displayed.PT# is automatically incremented.Collimate[F1][F3]HR: 123°40'20"HD*[n] < mVD:m> Measuring...< complete >N : 1234.567 mE : 123.456 mZ : 1.234 m>REC ? [YES][NO]SIDE SHOTPT#:NP-101INPUT SRCH ––– ENTER*1) If you want to input file name directly, press the [F1](INPUT) key and enter a file name.*2) When a file has been selected already, ‘*’ mark is indicated on left of current file name.For the file discrimination mark (*, @, &), refer to Chapter 9.3 “FILE MAINTENANCE”.*3) Data in a file shown with arrow can be searched by pressing [F2](SRCH) key.*4) Refer to Section 2.6 “How to Enter Alphanumeric characters”.*5) An error will be displayed when the internal memory is full.8-13