GPT-3000 SERIES - FLT Geosystems

5 COORDINATE MEASUREMENT5 COORDINATE MEASUREMENT5.1 Setting Coordinate Values of Occupied PointSet the coordinates of the instrument (occupied point) according to coordinate origin, and theinstrument automatically converts and displays the unknown point (prism point) coordinates followingthe origin.It is possible to retain the coordinates of the occupied point after turning the power off.Refer to Chapter 16 “SELECTING MODE”.nNPrism (n,e,z)zOccupied point COrigin(0,0,0)eEOperating procedure Operation Display1 Press the [F4](↓) key from the coordinatemeasurement mode to get the function on page 2.[F4]N: 123.456 mE: 34.567 mZ: 78.912 mMEAS MODE NP/P P1↓R.HT INSHT OCC P2↓2 Press the [F3](OCC) key. [F3]3 Enter N coordinate value. *1) [F1]Enter data[F4]4 Enter E and Z coordinate values in the samemanner.After entering the values, the display returnscoordinate measuring display.N→ 0.000 mE: 0.000 mZ: 0.000 mINPUT --- --- ENTER1234 5678 90. –[ENT]N: -72.000 mE→ 0.000 mZ: 0.000 mINPUT --- --- ENTERN: 51.456 mE: 34.567 mZ: 78.912 mMEAS MODE NP/P P1↓*1) Refer to Section 2.6 “How to Enter Alphanumeric characters”.● Input range –99999999.9990 < N,E,Z < +99999999.9990 m–9999 9999.999 < N,E,Z < +99999999.999 ft.–9999 9999.11.7 < N,E,Z +99999999.11.7