chapter 3 rigid pavement - DOT On-Line Publications - Department ...

BIBLIOGRXPHY
I. A.‘ Taragin, “Lateral Placement oi Trucks on TwcFLane and Four-Lane Di\.16&
Highways,” Public Roads, Vol. 30, NO. 3, August 1953.
-. 1 D. K. Enery, Jr., “Paved Shoulder Encr0atimer.t and Traverse Lane Disziacemen:
t’or Design Trucks on Rurai Freewavs.” Prelinzarv renort xesented to’
Com,mittee on Sitouider Design, Transportation Rekark Bdard, January 1914.
3. Transportation Research Board Record 594. “Photogrammetry, Water Quality,
Safety, Appurtenances, and Shoulder Design.” Washington, D.C.: Transportation
Research Board National Research Council, pp 51-53, 1976.
4. Frank R. VarMater and Amy M. Schutzbach, “Proceedings of the 4th International
Conference on Concrete Pavement Design,” 1989.
5. Portland Cement Association, “Thickness Design for Concrete Highway and Street
Pavement,” Appendix A - Development of Design Procedure.
6. Bert E. Colley, Claire G. Ball, and Pichet Arriyavat, “Evaluation of Concrete
Pavements with Tied’Shoulders or Widened Lanes,” 1978.
7. Glenn R Korfhage, Investigation No. 209, “Effect of Concrete Shoulders, Lane
Widening and Frozen Subgrade. on Concrete Pavement Performance,” Minnesota
Department of Transportation, July 1988.
8. C. E. Lee, P. R. Shankar, and B. Izadmer, “Lateral Placement of Trucks in
Highway Lanes,” FHWA/TX-84/33+310-lF, November .1983.
9. Load Stress at Pavement Edge, Portland Cement Association publication 1503OP,
1969.
10. Transportation Research Board 954, “Design, Evaluation, and Performance of
Pavements.” Washington, DC., Transportation Research Board Yational Research
Council, 1984, pp 28-37.
11. S.D. Tayabji, and B.E. Colley, “Improved Rigid Pavement Joints,” report prepared
by the Construction Technology Laboratories for the Federal Highway
Administration, October 1983.
12. Eric J. Keller, “Evaluation of Portland Cement Concrete Shoulders in Georgia,”
Georgia Department of Transportation, 1988.
3.825