Code of Practice for the Electricity (Wiring) Regulations - 2009 Edition

will have affected the results of these tests and inspections during this
period.
(3) Items to be inspected and tested
List of items to be inspected and tested for initial tests and periodic tests
are shown in Code 22D.
(4) Related ordinance and regulations to be observed
Other statutory requirements in relation to electrical installations should
also be referred to during the inspection, including in particular:
(a) (i) Fire Services Ordinance,
(ii) Fire Services (Installations and Equipment) Regulations,
(b) (i) Fire Safety (Commercial Premises) Ordinance,
(ii) Fire Safety (Buildings) Ordinance,
(c) (i) Factories and Industrial Undertakings Ordinance,
(ii) Factories and Industrial Undertakings (Electricity) Regulations,
(iii) Construction Sites (Safety) Regulations,
(iv) Factories and Industrial Undertaking (Work in Compressed Air)
Regulations,
(v) Factories and Industrial Undertakings (Spraying of Inflammable
Liquid) Regulations,
(vi) Factories and Industrial Undertakings (Cargo and Container
Handling) Regulations,
(d ) (i) Dangerous Goods Ordinance,
(ii) Dangerous Goods (General) Regulations.
(5) Energisation of installation for testing purposes
To energise an installation or part of it for testing by a registered
electrical worker prior to the issue of the relevant certificate is acceptable.
(6) Standard symbols to be used
Standard symbols to Appendix 8 should be used in schematic diagrams
where appropriate.
140