UAD Powered Plug-Ins Manual v5.2 - Just Music

UAD–Xtenda
The UAD–Xtenda is an optional package that enables the UAD–Xpander to
be used in a desktop computer that has PCIe expansion slots. The
UAD–Xpander/Xtenda system provides a convenient way to switch the same
UAD–Xpander unit between desktop and notebook computers.
Multicard Setup
Xtenda Package
Contents
If a computer system has both PCI/PCI-X and/or PCIe slots, the UAD–1,
UAD–1e, and UAD–Xpander via UAD–Xtenda (or any combination thereof)
can all be installed and used simultaneously as a multicard system (four cards
maximum). The UAD drivers and plug-ins are the same for the UAD–1,
UAD–1e, and UAD–Xpander. See Chapter 5, “Using Multiple UAD Cards”
for detailed information.
The UAD–Xtenda package should contain the following items:
• UAD–Xtenda PCIe expansion card
• UAD Link Cable
Xtenda
Installation
Installing the UAD-Xtenda card uses the exact same procedures as UAD card
installation. Please see “UAD Hardware Installation” on page 26 for
step-by-step procedures.
Connect the UAD–Xpander to the UAD–Xtenda. “Xpander Connections” on
page 105
If the UAD Powered Plug-Ins software is already installed (see page 24), you
are now ready to use the UAD–Xpander using the instructions in the next section.
Xpander Operation
After UAD Powered Plug-Ins software v4.7.1 (or higher) is installed and the
UAD–Xpander is connected to the notebook computer or desktop computer
via UAD–Xtenda, the system is ready to be powered up and used.
Note: All UAD–Xpander instructions apply regardless of whether the unit is
attached to a notebook computer or a desktop computer via UAD–Xtenda.
Startup
Sequence
For optimum results, specific steps must be followed when starting the
UAD–Xpander and host computer system. Following this sequence ensures
the Xpander electrical and UAD driver requirements are properly met.
UAD Powered Plug-Ins Manual - 106 - Chapter 10: UAD-Xpander & UAD-Xtenda