UAD Powered Plug-Ins Manual v5.2 - Just Music

Late-Field
Relative Timing
To highlight the relative timing relationship between the early reflections and
late-field reverberation components, the shape and timing of the late-field is
represented as an outline in the Reflections panel. The shape of this outline is
modified by parameters in the Reverberations panel, not the Reflections
panel.
Reverberation Panel
The Reverberation panel (Figure 104) contains the parameters that control the
late-field (LF) reverb tail for DreamVerb.
The primary spectral characteristics of the late-field reverberation is determined
by the parameters in the Materials panel (page 278) in conjunction
with the Reverberation panel settings.
Note: The values for the late-field controls are displayed in the text fields at
the bottom of the Reverberations panel. These values can also be entered directly
using the text entry method.
Bypass
switch
Amplitude
and Slope
control bat
Early reflections
relative timing
display
Diffusion
control
Late-field
start time
control bat
Decay Time
control bat
Figure 104. DreamVerb Reverberation panel
Bypass
The late-field reverberations can be disabled with this switch. When the
switch is off (black instead of grey), the other Reflections controls have no effect.
This switch has no effect on the direct signal path.
UAD Powered Plug-Ins Manual - 282 - Chapter 32: DreamVerb