UAD Powered Plug-Ins Manual v5.2 - Just Music

Amplitude
control
Early
Reflections
display
Predelay
control
Amplitude
Control
Late-Field
Reverberations
display
Predelay
control
Figure 92. RealVerb Pro Timing panel
Decay Time
control
Diffusion
control
To adjust the timing of the early reflections:
1. Drag the Amplitude control for the early reflections up or down (from
–80 dB to 0 db) to affect the energy of the reflections. The Amplitude value
is indicated in the text field at the bottom of the Timing panel.
2. Drag the Predelay control for the early reflections left or right (from
1–300 milliseconds) to affect the delay between the dry signal and the onset
of early reflections. The Pre-delay time is indicated in the text field at the
bottom of the Timing panel.
Note: The length in time of the early reflections cannot be adjusted from the
Timing panel, and instead is determined by the reverb’s shape and size (see
Figure 89).
To adjust the timing of the late-field reverberations:
1. Drag the Amplitude control for the late-field reverberations up or down
(from –80 dB to 0 db) to affect the energy of the reverberations. The Amplitude
value is indicated in the text field at the bottom of the Timing panel.
2. Drag the Predelay control for the late-field reverberations left or right (from
1–300 milliseconds) to affect the delay between the dry signal and the onset
of late-field reverberations. The Predelay time is indicated in the text
field at the bottom of the Timing panel.
UAD Powered Plug-Ins Manual - 266 - Chapter 31: RealVerb Pro