UAD Powered Plug-Ins Manual v5.2 - Just Music

Roland Dimension D Controls
The Roland Dimension D is very simple device to operate; it has only three
controls: Power, Mono, and Mode. Each control is detailed below.
Dimension Mode
Multiple Buttons
Input Mode
Switch
The Dimension Mode determines the effect intensity.
Four different modes are available. Mode 1
is the most subtle effect, and Mode 4 is maximum
intensity.
True to the original hardware, multiple Dimension Mode buttons can be engaged
simultaneously for subtle sonic variations of the four main modes. To
engage multiple Dimension Mode buttons, press the Shift key on the computer
keyboard while clicking the Mode buttons.
The original Roland Dimension D has an input switch on the back
that puts the unit into mono-in/stereo-out mode. We have included
this function and moved the switch “to the front” for your processing
convenience.
When in Mono mode, the input to Dimension D is monophonic even when
used in a stereo-input configuration (stereo inputs are summed to mono). This
can be useful for sonic variation, such as when the plug-in is used in an auxiliary/effect
send configuration.
The default position (in) is stereo mode. Click the pushbutton switch (out) to enable
Mono mode.
Power Switch
Power LED
Output Level
This switch determines whether the plug-in is active. This is useful
for comparing the processed settings to that of the original signal,
or to bypass the plug-in to reduce the UAD DSP load. Click
the pushbutton switch to change the Power state.
The Power LED is illuminated when the plug-in is active.
This LED-style meter indicates the level of the signal at the output
of the plug-in.
When the Dimension Mode is OFF but the Power switch is ON,
audio is not processed but the Output Level meter is still active.
UAD Powered Plug-Ins Manual - 249 - Chapter 29: Roland Dimension D