UAD Powered Plug-Ins Manual v5.2 - Just Music

Gain
The Gain knob controls the signal level that is
output from the plug-in. The default value is
0dB. The available range is ±10dB.
Harrison 32C SE
Figure 83. The Harrison 32C SE plug-in window
Overview
The UAD Harrison 32C SE is derived from the UAD Harrison 32C. Its algorithm
has been revised in order to provide sonic characteristics very similar to
the Harrison 32C but with significantly less DSP usage. It is provided to allow
Harrison-like sound when DSP resources are limited. Nobody with “golden
ears” will say it sounds exactly like the full version, but it still sounds great and
is very usable in most situations.
The Harrison 32C SE interface can be differentiated from the Harrison 32C
by knob color and the module name. The Harrison 32C SE blue knobs instead
of the Harrison 32C’s ivory knobs, and the module name on the upper right
of the interface panel includes “SE.”
Harrison 32C SE
Controls
The Harrison 32C SE controls are exactly the same as the Harrison 32C.
Please refer to the Harrison 32C section for Harrison 32C SE control descriptions
(see “Harrison 32C EQ and Harrison 32C SE Controls” on page 240).
UAD Powered Plug-Ins Manual - 242 - Chapter 27: Harrison 32C EQ