UAD Powered Plug-Ins Manual v5.2 - Just Music

The DreamVerb user interface (Figure 97 on page 273) is similarly organized.
Reflected energy equalization is controlled with the Resonance panel. The
pattern of early reflections (their relative timing and amplitudes) is determined
by the room shapes in the Shape panel (Figure 101 on page 276). Early reflection
pre-delay, slope, timing, and amplitude are specified in the Reflections
panel (Figure 103 on page 281). The Materials panel (Figure 102 on
page 278) is used to select relative late-field decay rates as a function of frequency.
The late-field predelay, decay rate, room diffusion, slope, and level
is specified in the Reverberation panel (Figure 104 on page 282). Finally, the
Positioning panel (Figure 105 on page 284) contains controls for the placement
of the source, early reflections, and late-field reverberation.
Resonance (Equalization) Panel
The Resonance panel (Figure 99 on page 275) is a five-band equalizer that
can control the overall frequency response of the reverb, effecting its perceived
brilliance and warmth. By adjusting its Amplitude and band Edge controls,
the equalizer can be configured as shelving or parametric EQs, as well
as hybrids between the two.
The EQ curve effects the signal feeding both the early reflections and the late
field reverberations, but not the direct path.
Bands 1 and 5 are configured as shelving bands. Bands 2, 3, and 4 also
have an Edge control for adjusting its bandwidth.
Generally speaking, a lot of high-frequency energy results in a brilliant reverberation,
whereas a good amount of low-frequency content gives a warm reverberation.
Note: The values for the EQ parameters are displayed in the text fields at the
bottom of the Resonance panel. The values can also be entered directly using
the text entry method.
UAD Powered Plug-Ins Manual - 274 - Chapter 32: DreamVerb