UAD Powered Plug-Ins Manual v5.2 - Just Music

Master Level
Knob
This control adjusts the signal output level of Cambridge EQ. This
may be necessary if the signal is dramatically boosted or reduced
by the EQ settings. The available range is +/- 20dB.
A/B Selector
Button
The A/B Selector switches between two separate sets of Cambridge
EQ plug-in values. This feature enables easy switching
between two completely independent EQ curves which can be
useful for comparison purposes or for automating radical timbre
changes. Both the A and B curves reside within a single
Cambridge EQ preset.
Click the A/B Selector button to switch between the two curves. When A is
displayed, the button and the EQ response curve is yellow. When B is displayed,
the button and the curve is green.
Note: To reset the A or B curve to a null (flat) response, control-click the A/B
Selector button. The active curve will be nulled.
Note: To copy one curve to another, shift-click the button. The active curve will
be copied to the inactive curve.
EQ Enable
Button
This button enables or disables the Cambridge EQ altogether.
You can use this switch to compare the processed
settings to that of the original signal, or to bypass the plugin
to reduce UAD DSP load.
UAD Powered Plug-Ins Manual - 204 - Chapter 22: Cambridge EQ