UAD Powered Plug-Ins Manual v5.2 - Just Music

For example, you could run low-DSP plug-ins such as the UAD CS-1 on the
UAD-1, while specifying that resource-hungry plug-ins such as Neve 33609
run on the UAD-2.
Run On Menu
The Run On column contains a drop menu for each plug-in. Specify
which card type (UAD-2 or UAD-1) the plug-in will load onto
with the Run On drop menu. Click the disclosure triangle to see
the menu, then drag and release on the desired card type.
Tip: Hold Shift when specifying a card to quickly change all
plug-ins in the list to that card type.
If plug-ins for only one card type (UAD-2 or UAD-1) are installed, the disclosure
triangle is not displayed and the drop menu is unavailable.
Note: The Run On menu should not be used dynamically; it is designed to be
“set and forget” because the value is not stored within sessions.
Help Column
Buy Column
Click the Help button (“?”) to open the UADManual.pdf (the file you are
reading now).
If the computer is connected to the internet, clicking Buy links to the
plug-in product pages at the UA online store. See “UA Online Store” on
page 47 for purchasing details.
Configuration Panel
The UAD Configuration Panel is where most of the global UAD settings and
preferences are specified. Refer to Figure 12 on page 66 for the parameter
descriptions.
The parameters that are displayed in the Configuration Panel are dependent
upon the UAD hardware that is currently installed and the OS platform (Windows
or Mac). For example, if you have only UAD-2 cards installed in a Windows
system, you will not see the UAD-1 or Macintosh parameters.
UAD Powered Plug-Ins Manual - 65 - Chapter 6: UAD Meter & Control Panel