Training Program Worldwide Technical Training - Daimler

Chapter Technical Training
Department Diagnosis Engineering
Title T0018F • Vans • Mercedes-Benz Certified Diagnostic Technician • Electrical system •
Run
Course Number T0018F-AA
Target group Diagnosis Technician
Objectives The participant can:
> Plan and efficiently perform troubleshooting on the current vehicle systems with the
help of the levels model
> Describe the fundamentals of the PSM and carry out basic parameterization
Contents > Networking in the Vito, Viano and Sprinter
> Functions of SAM, electronic ignition switch and overhead control panel in the Vito,
Viano and Sprinter
> Turn signal control in the Vito, Viano and Sprinter
> Tasks of the trailer connection unit in Vito, Viano
> Development of signal paths
> Fundamentals of the PSM in the Vito, Viano and Sprinter
> Troubleshooting according to the levels model
Mandatory prerequisite T0004F • Passenger Cars, Trucks, Vans, smart • Diagnosis Strategy 1 • Go
T0005F • Passenger Cars, Trucks, Vans, smart • Mercedes-Benz Certified Diagnostic
Technician • Diagnosis Strategy 2 • Run
T0017F • Vans • Mercedes-Benz Certified Diagnostic Technician • Initial Test • Go
This training/test has to be booked, before you are authorized to book the main training.
You´ll find a detailed description about the training, using the training code.
Training Depth Run Method Theorie 20%, Practice80%
Note The training is a part of the qualification series for becoming a Certified Diagnostic
Technician.
Duration 4,0 days (per 8 hours)
Stand 08/2012 103