Training Program Worldwide Technical Training - Daimler

Chapter Technical Training
Department Fundamentals
Title T0400F • Vans • Sprinter (BR 906) • Training for Body Manufacturers • Run
Course Number T0400F-AA
Target group Other
Objectives The participant can:
> Name the most important Mercedes-Benz workshop systems for body manufacturers
and the contents of these systems
> Apply the body/equipment mounting directives for bodies and conversions relevant for
the Sprinter
> Describe the information on product liability
> State the limits for intervention in the on-board electrical system for conversions and
retrofits
> Recognize cross-control unit functions
> Retrofit the parameterizable special module (PSM)
> Knows the basic functions of the PSM
Contents > Information on the basic vehicle
> Overview of
- Workshop Information System (WIS)
- Electronic Parts Catalog (EPC)
- Diagnosis Assistance System (DAS)
- Portals
> Practical examples of DAS and wiring diagrams
> Product liability and body manufacturer guidelines
> Overview
- Wiring diagrams and legends
- Power supply
- Battery, alternator, fuses
- Simple voltage taps
- Pre-installations and retrofits
- Cable routing
> Networking fundamentals
> SCN coding/flashing
> Parameterizable Special Module (PSM)
- Base function
- Power take-offs
- Practical examples
- PSM support
> Central locking, electric sliding door, KEYLESS-GO
> Special features of chassis modifications
> Body guidelines and corrosion protection
Training Depth Run Method Theorie 70%, Practice30%
Note The participant has very good knowledge in the field of vehicle electrical/electronic
systems.
Stand 08/2012 35