Training Program Worldwide Technical Training - Daimler

Chapter Technical Training
Department Bodywork
Title T0463F • Passenger Cars • Aluminum Welding 2 • Fly
Course Number T0463F-AA
Target group Bodywork Expert
Objectives The participant can:
> Assess the hazards of MIG welding and take measures to protect his/her health
> Name the differences between MIG/MAG welding and the advantages of the pulsed
arc technique
> Set welding equipment to suit the base material, the type of seam and the welding
position
> Work on skills with regard to the weld positions and seam types used in repairs
> Detect possible weld seam faults and respond appropriately
> Verify his/her MIG aluminum welding skills during tests
Contents > Work safety and accident prevention
> MIG/MAG welding, pulsed arc
> Adjustment of welding parameters/effects on the weld
> Preparation for the test in accordance with DIN ISO EN 9606-2
> Preparation for the test on die-cast and chilled-cast components in accordance with
Mercedes-Benz specifications
> Test in accordance with the above-listed standards
> Final qualification in accordance with ISO 9606-2 and Mercedes-Benz standard
(GSP/TPE) for aluminum welding on body structures
Mandatory prerequisite T0365F • Passenger Cars • Aluminum Welding 1 • Run
This training/test has to be booked, before you are authorized to book the main training.
You´ll find a detailed description about the training, using the training code.
Training Depth Fly Method Theorie 10%, Practice90%
Note The participant must bring his or her own complete protective clothing (welding mask,
safety shoes, jacket or overalls), as it will be worn during the practical segment of the
course.
The participant must bring a "QEV 111 AEYEGL TS Weld Specimen Material" pack to the
training course.
The final test is valid for two years if the prescribed work sample 1 (T0513F), the work
sample 2 (T0518F) and the work sample 3 (T0530F) are created with the required quality
every six months.
After two years, further training is required in order to extend the certificate by another
two years.
The training price includes all test fees.
Duration 5,0 days (per 8 hours)
Stand 08/2012 313