Training Program Worldwide Technical Training - Daimler

Chapter Technical Training
Department On-board Electrical System, Bus System
Title T0195F • Truck FUSO • Canter • Electrical systems/electronics and on-board electrical
system for companies with the Multi Use Tester (MUT 3) diagnostic system. • Run
Course Number T0195F-AA
Target group System Technician
Objectives The participant can:
> Name the basic electrical variables and their relationship to one another (Ohm's law)
> Independently conduct measurements on the vehicle with the aid of the workshop
literature and a multimeter
> Apply the latest service literature in a targeted manner for maintenance, diagnosis and
repair
> Carry out test, adjustment and repair work using digital multimeters, MUT 3 and
oscilloscope on electrical systems in the Canter and on components, sensors and
actuators
> Independently implement the regular updates according to requirements
> Independently plan targeted diagnostic steps for the Canter
> Initiate and carry out appropriate remedial measures
Contents > Basic electrical variables
> Ohm's law
> Electricity hazards
> Circuit types and their properties
> Testing electrical components
> Control and regulation
> Oscilloscope
> ECU parameterization
> Proper testing of networking
> User interface and fundamentals of the MUT 3 software programs
> Update process and procedures, installation options
> Efficient use of MUT 3 and the MUT III programs
> Strategies for diagnosing electrical and electronic systems
> Practical work for a guided diagnosis based on the diagnosis model
Optional prerequisite The participant has basic knowledge of electrical systems.
Training Depth Run Method Theorie 30%, Practice70%
Duration 2,0 days (per 8 hours)
Stand 08/2012 75