Training Program Worldwide Technical Training - Daimler

Chapter Technical Training
Department On-board Electrical System, Bus System
Title T0244F • Trucks • On-board Electrical Systems, System Networking, Instrumentation •
Actros, Axor, Atego • Run
Course Number T0244F-AA
Target group System Technician
Objectives The participant can:
> Describe the design of on-board electrical systems, the CAN technology used and the
related basic functions in the Actros (BR 93x), Axor2 and Atego2
> Describe the functions and interactions of the various subsystems, including their
sensors and actuators, and conduct diagnostic operations on them
> Describe the design and function of current instruments and parameterize them
> Connect accessories correctly to the new on-board electrical system
Contents > On-board electrical system architecture and CAN technology in the Actros (BR 93x),
Axor2 and Atego2 truck model series
> Strategies and practical procedures to follow when diagnosing complex electrical and
electronic systems
> By means of fault simulation and appropriate diagnostic operations, familiarization
with the interplay and typical interactions of the various subsystems through practical
work
> Work through current topics and diagnostic cases
Optional prerequisite The participant has completed the CBT programs "Controller Area Network (Passenger
Cars and Commercial Vehicles) Part 1 - Fundamentals" (order no. 1290 4716) and
"Actros Network - Parts 1-2" (order no. 1290 4330/ 31).
In addition to this, he/she has very good knowledge about electrical and electronic
systems and has attended the training course "T0004F • Passenger Cars, Trucks, Vans,
smart • Diagnosis Strategy 1 • Go".
The participant is proficient in the use of Star Diagnosis, including HMS 990.
Training Depth Run Method Theorie 40%, Practice60%
Note Participants can test and refresh their knowledge using the CBT program "Wiring
Diagrams" Parts 1-3 (order no. 1290 4722/ 23 and 1290 4312). The content of this
training is directed at system/repair technicians with little experience in on-board
electrical systems.
Duration 4,0 days (per 8 hours)
Stand 08/2012 76