Training Program Worldwide Technical Training - Daimler

Chapter Technical Training
Department Fundamentals
Title T0119F • Vans • Product Qualification of the Vito E-CELL • Go
Course Number T0119F-AA
Target group System Technician Powertrain
Objectives The participant can:
> Describe and take the required safety precautions for working on the Vito E-CELL
> Describe the task, design, function and location of the high-voltage components
> Properly carry out the preparatory procedures and service operations on the vehicle
> Perform diagnostic operations on the vehicle's high-voltage system
Contents > Task, design and function of high-voltage components in the vehicle
> Procedure for disabling the high-voltage system
> Disable the power in the HV system
> Repair procedure when disabling the high-voltage system (power disable event log,
restart operations, etc.)
> System network and integration in the overall vehicle network
> Diagnostic work on the vehicle
> Repair information (e.g. installation/removal of components)
> Practical work on the vehicle and the system
Mandatory prerequisite T0001F • Passenger Cars, Trucks, Vans, smart, Truck FUSO • High-Voltage Qualification
for Motor Vehicles • Go
This training/test has to be booked, before you are authorized to book the main training.
You´ll find a detailed description about the training, using the training code.
Training Depth Go Method Theorie 25%, Practice75%
Note In order to successfully conclude the product qualification, you are required to
successfully pass a high-voltage awareness and qualification training. IMPORTANT!
Persons with electronic implants (e.g. pacemakers) are not permitted to work on highvoltage
systems. They may not do any practical work on the HV system during training
and are not HV-certified after the conclusion of training.
Duration 2,0 days (per 8 hours)
Stand 08/2012 32