HQ Pro-Stitcher User Manual - Handi Quilter

6. Remove the computer from its packaging. Lift
open the screen and rotate the display clockwise so
the display covers the keyboard. Install the computer
battery into the back of the computer. Install the
computer into the computer bracket by sliding it
into the black bracket from the top downward
(Figure 22). With the computer installed in the
bracket, connect the USB cable (Page 3, N) between
one of the bottom USB ports (Figure 23 position B)
and the black box on the back of the bracket (Figure
24 position C). Also connect the computer power
cord (Page 3, O) between the computer (Figure 23
position C) and the black box (Figure 24 position A).
Either of the two open USB ports (Figure 23 position
A or Figure 25) may be used to plug in the USB Flash
drive for loading designs.
Figure 22
A B C
A B C
Figure 23
Figure 24
Figure 25
Page 14
HQ Pro-Stitcher User Manual