HQ Pro-Stitcher User Manual - Handi Quilter

Freehand
“Freehand” allows the user to record the movement
of the HQ Pro-Stitcher and save the sequence of
movements as a pattern file (Figure 60 & 61).
Clear
Press the “Clear” button to clear the pattern window
before starting to record.
Figure 60
Handlebar Control
For HQ Sixteen users, press the “Handlebar Control”
button to pass control to the HQ Sixteen handles to
allow the user to control stitching while recording
the freehand motion. HQ 18 Avanté and HQ 24 Fusion
users have handlebar control all the time, even while
the HQ Pro-Stitcher is in control, so this step is not
necessary for those users.
Figure 61
Start Record
Make sure the “Motors Enabled/Disabled” button in
the top right-hand corner of the screen is in the “Motors
Disabled” state. Press the “Start Record” button
to begin recording the movements of the quilting
machine.
www.HandiQuilter.com/ProStitcher Page 73