Converting Waste Agricultural Biomass into a Resource - UNEP

operation of each to match the steam load and maintain efficient combustion.
All above work in concert to reduce solid fuels into usable heat energy utilizing
the most reliable system yet devised. Our “cruise control” system orchestrates
the operation of each to match the steam load and maintain efficient
combustion.
H. “Hybrid” Design Boiler
Originally built in Germany, the “Hybrid” design is unequaled in the heat
recovery from solid fuels.
Ha. Water Tube Section
The watertube section of the “Hybrid” boiler allows for abundant radiant
heating surface. This allows for quicker recovery and more efficient heat
transfer than in the typical firetube boiler.
Hb. Fire Tube Section
The fire tube section of the “Hybrid” boiler allows for greater water volume
and thermal reserve than the typical water tube boiler. Quick response
with the additional capacity to handle spike loads is the result. In addition,
the two pass design increases gas velocity and efficiency and a cleaner
boiler result.
Hc. Steam Space
The fire tube section of the “Hybrid” also allows for several times the
steam space of a typical boiler. The larger steam release surface is
calmer, reducing carry over of unevaporated water. The resulting drier
steam also reduces system scaling. In addition, dry steam helps eliminate
unnecessary extra condensate. Energy and fuel are saved.
I. Boiler Blowdown
J. Handhole
The waterside openings are located in the most effective positions. The lower
hand holes offer far better access for both clean out and inspection.
K. Manway
L. Continuous Blowdown
M. Soot Blower
Fixed zone
N. Insulation And Jacketing
2’ High Density fiberglass insulation and 22 ga. zinc coated metal jacket.
O. Rear Smoke Box
Liberal and easy accessible gas turn around area. No large refractory doors
or wet back to work around.
P. Reinjection Blower
Continuously cleans rear smoke box.
Q. Skids and Support Structure
Unit is skid mounted with rear supports for easy handling and set-up.
Operation and Maintenance Requirements
3. Ash removal is a manual operation.
4. The company stocks replacement parts for the boilers and other major
competitors' boilers as well. Manufacturing facility is in Coolidge, GA,
supports parts center with the latest technology and competitive rates,
offering shipping with Emory, DHL, Fed Ex and "UPS On Line Shipping
/ Tracking" for speedy delivery of critical parts orders to any facility in a
timely fashion
33