Converting Waste Agricultural Biomass into a Resource - UNEP

utilizing the most reliable system yet devised. Our “cruise control”
system orchestrates the operation of each to match the steam load and
maintain efficient combustion. All above work in concert to reduce solid
fuels into usable heat energy utilizing the most reliable system yet
devised. Our “cruise control” system orchestrates the operation of each
to match the steam load and maintain efficient combustion.
H. “Hybrid” Design Boiler
Originally built in Germany, the “Hybrid” design is unequaled in the
heat recoery from solid fuels.
Ha. Water Tube Section
The watertube section of the “Hybrid” boiler allows for abundant radiant
heating surface. This allows for quicker recovery and more efficient
heat transfer than in the typical firetube boiler.
Hb. Fire Tube Section
The fire tube section of the “Hybrid” boiler allows for greater water
volume and thermal reserve than the typical water tube boiler. Quick
response with the additional capacity to handle spike loads is the
result. In addition, the two pass design increases gas velocity and
efficiency and a cleaner boiler result.
Hc. Steam Space
The fire tube section of the “Hybrid” also allows for several times the
steam space of a typical boiler. The larger steam release surface is
calmer, reducing carry over of unevaporated water. The resulting drier
steam also reduces system scaling. In addition, dry steam helps
eliminate unnecessary extra condensate. Energy and fuel are saved.
I. Boiler Blowdown
J. Handhole
The waterside openings are located in the most effective positions. The
lower hand holes offer far better access for both clean out and inspection.
K. Manway
L. Continuous Blowdown
M. Soot Blower
Fixed zone
N. Insulation And Jacketing
2’ High Density fiberglass insulation and 22 ga. zinc coated metal jacket.
O. Rear Smoke Box
Liberal and easy accessible gas turn around area. No large refractory
doors or wet back to work around.
Operation and Maintenance Requirements
9. The new HBC chain grate-type stoker system permits a wide range of
biomass fuels with high ash contents to be combusted in an efficient
manner with the added advantage of automatic de-ashing.
10. The company stocks replacement parts for the boilers and other major
competitors' boilers as well. Manufacturing facility is in Coolidge, GA,
supports parts center with the latest technology and competitive rates,
offering shipping with Emory, DHL, Fed Ex and "UPS On Line Shipping
/ Tracking" for speedy delivery of critical parts orders to any facility in a
timely fashion.
55