4 cylinders + 6 cylinders 4 cylinders + 6 cylinders - Steyr Motors

ToC
01 ENGINE
SERVICE MANUAL MARINE ENGINES
11 For 4. cyl. engines
Unscrew hexagon screw (SW10) (ill.9/pos.1) of raw
water pipe clamp.
12 Open hose clamp (ill.9/pos.2) on intercooler.
A2
A1
13 Open hose clamp on heat exchanger (ill.10/pos.1)
and remove raw water pipe.
08.01 ill.9
C1
For 6 cyl. engines (item 14-19)
14 Loosen hose clamp (ill.11/pos.1). Loosen 2 hexagon
screws (SW13) (ill.11/pos.2) and remove connecting
bend.
08.01 ill.10
C2
C1
08.01 ill.11
15 Pull of plug (ill.12/pos.1) for sensor of control rack.
C3
16 Loosen plug (ill.12/pos.2) for accelerator
potentiometer.
17 Loosen 3 hexagon screws (SW13) (ill.12/pos.3) and
remove.
Remove bracket with potentiometer.
18 Loosen hollow screw of boost pressure hose (ill.12/
pos.4) on air collector and remove.
C1
C2
C4
08.01 ill.12
Page ENGINE - 76 Z001019/0_6_July 2008