25.12.2014 Views

4 cylinders + 6 cylinders 4 cylinders + 6 cylinders - Steyr Motors

4 cylinders + 6 cylinders 4 cylinders + 6 cylinders - Steyr Motors

4 cylinders + 6 cylinders 4 cylinders + 6 cylinders - Steyr Motors

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ToC SERVICE MANUAL MARINE ENGINES<br />

Indication status<br />

Fault<br />

ELECTRICAL SYSTEM<br />

Remarks<br />

ON<br />

(2x per sec.)<br />

80° - 90°C<br />

high exhaust<br />

temperature<br />

(off 80° C)<br />

check raw water<br />

system,<br />

strainer, impeller pump<br />

OFF<br />

07.05 ill.4<br />

OFF FLASHING<br />

(2x per sec.)<br />

ON high approx 105°C<br />

(2x per sec.)<br />

engine coolant<br />

temperature to high<br />

after cooling down,<br />

check engine coolant<br />

level<br />

OFF OFF OFF<br />

07.05 ill.5<br />

ON<br />

120°C<br />

(2x per sec.)<br />

defect engine coolant<br />

sensor or<br />

sensor connection<br />

after cooling down,<br />

check engine coolant<br />

level, sensor (B16)<br />

and connection<br />

OFF OFF OFF<br />

07.05 ill.6<br />

OFF<br />

80° - 90°C<br />

instable idle speed,<br />

no indication on<br />

tachometer<br />

defect speed sensor (B15)<br />

or<br />

sensor connection<br />

OFF OFF OFF<br />

07.05 ill.7<br />

ON<br />

80° - 90°C<br />

OFF OFF ON<br />

07.05 ill.8<br />

Trouble in governing loop,<br />

involved components:<br />

control solenoid, rack,<br />

control gear of<br />

unit injector,<br />

rack position sensor<br />

Failure in governing loop:<br />

time limit exceed for rack<br />

positioning. Restriction<br />

or high friction in control<br />

devices.Stored failure code<br />

must be cleared memory.<br />

Tools: PC-service program<br />

Z001019/0_6_July 2008 Page ELECTRICAL SYSTEM - 55

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!