4 cylinders + 6 cylinders 4 cylinders + 6 cylinders - Steyr Motors

ToC
01 ENGINE SERVICE MANUAL MARINE ENGINES
8 Pre-set dial gauge to position 20 mm stroke (small
pointer at 20 - inside scale, big pointer at 0 - outside
scale) or press zero button an digital dial gauge.
00.00
9 Lock crankshaft, refer 01.00.01
00.03 ill.5
00.03 ill.6
10 Loosen Allen head screw SW 8 of belt tensioner and
remove tensioner.
11 Loosen 3 TORX screws for vibration damper by
means of special tool 2300767/0 and remove vibration
damper.
00.03 ill. 7
12 Remove timing belt.
ATTENTION: With loose and/or removed timing belt,
the camshaft or crankshaft must not
be turned.
This could result in a collision of pistons
and valves.
00.03 ill. 8
Page ENGINE - 8 Z001019/0_6_July 2008