25.12.2014 Views

4 cylinders + 6 cylinders 4 cylinders + 6 cylinders - Steyr Motors

4 cylinders + 6 cylinders 4 cylinders + 6 cylinders - Steyr Motors

4 cylinders + 6 cylinders 4 cylinders + 6 cylinders - Steyr Motors

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

ToC SERVICE MANUAL MARINE ENGINES<br />

01 ENGINE<br />

7 Pull out valve stem gasket with special tool No.<br />

2300758/0.<br />

NOTE:<br />

When inserting the valves, lubricate<br />

valve stem with motor oil.<br />

01.01 ill.5<br />

8 Put special tool No. V000152/0 onto valve stem end<br />

and pull on new valve stem over sleeve.<br />

9 Remove sleeve and press on valve stem gasket with<br />

special tool No. V000166/0 until valve stem gasket is<br />

supported on collar of valve guide.<br />

10 Lubricate valve stem (motor oil).<br />

11 Mount special tool No. VR00104/0 again.<br />

01.01 ill.6<br />

12 Put on spring washer, valve spring and spring plate<br />

and prestress valve spring with special tool No.<br />

VR00105/1.<br />

NOTE:<br />

The progressively wound end of the<br />

valve spring is located on the cylinder<br />

block.<br />

13 Insert wedges, relax valve spring and check correct<br />

seat of wedges.<br />

01.01 ill.7<br />

Z001019/0_6_July 2008 Page ENGINE - 29

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!