4 cylinders + 6 cylinders 4 cylinders + 6 cylinders - Steyr Motors

ToC
GENERAL
SERVICE MANUAL MARINE ENGINES
H
H 1
Tightening Torques
Listing of Tightening Torques
Camshaft Housing
Screw joint to cylinder block
1. step: 15 Nm +/- 2
2. step: 25 Nm +/- 1
Tighten screws of camshaft housing in two
steps in precedence of numbering on bearings
(from the inside outwards).
08.01 ill.1
Plug screw for locking pin
in engine housing
50 Nm +/- 5
08.01 ill.2
Connecting rod screws
(apply oil to thread and screwhead support)
1. step: 10 Nm +/- 1
2. step: 30 Nm +/- 3
3. step: 75° +/- 4°
08.01 ill. 3
Main bearing screws
(apply oil to thread and screwhead support)
1. step: 35 Nm +/- 3
2. step: 45° +/- 4°
3. step: 45° +/- 4°
08.01 ill.4
Page GENERAL-44 Z001019/0_8_Octobre 2011