4 cylinders + 6 cylinders 4 cylinders + 6 cylinders - Steyr Motors

ToC
01 ENGINE SERVICE MANUAL MARINE ENGINES
NOTE: If the index value of engine timing should
not
correspond to the desired value,
follow the instructions as per item 24.
21 In case of a correct index value of engine timing,
tighten the hexagon nut of the camshaft sprocket (SW
30) with 240 Nm by holding up with special tool No.
2300711/0.
00.05 ill.23
22 ATTENTION: The following torques are to be
checked again.
õ
1 Torque on hexagon nut of camshaft sprocket
(SW 30) 240 Nm +/- 12
2 Allen head screw (SW 8) of timing belt
tensioner at 45 Nm +/- 4
3 3 TORX screws on vibration damper with
135 Nm +/- 7
23 Remove locking pin on crankshaft.
00.05 ill.24
Page ENGINE - 22 Z001019/0_6_July 2008