4 cylinders + 6 cylinders 4 cylinders + 6 cylinders - Steyr Motors

03 FUEL SYSTEM SERVICE MANUAL MARINE ENGINES
18 Loosen hose clamp (ill.9/pos.1) of hose of oil separator
and remove hose.
1
19 Loosen 4 hexagon nuts (ill.10+11/pos.1) of turbocharger
flange. Remove turbocharger and seal, dispose
seal. (if seal is used)
05.01 ill.9
1
1
05.01 ill.10
Assembly:
ATTENTION: Check hose connection and hose
between turbocharger return pipe
and engine housing intake for crack
and damage. Replace, if necessary.
1
For 4 cyl. engines only
For 6 cyl. engines only:
05.01 ill.11
Clean sealing surface of flange turbo charger and exhaust manifold
and lubricate with grease Z012222/0.
Clean sealing surfaces of flange turbo charger and exhaust
manifold. Replace flange seal.
Further assembly is done in reverse order.
ATTENTION: Tigthen the two spring-clamps of hose turbocharger - intercooler with a torque of
3,5 Nm. Don´t strip!
Page FUEL SYSTEM - 24 Z001019/0_7_July 2012