INFINITY ANALYZE User's Manual - Spectra Services
INFINITY ANALYZE User's Manual - Spectra Services
INFINITY ANALYZE User's Manual - Spectra Services
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Release 6.0.0<br />
Lumenera <strong>INFINITY</strong> <strong>ANALYZE</strong><br />
User’s <strong>Manual</strong><br />
Click to count. A temporary mark appears with each click. Right button double click to<br />
finish counting. The visited locations will be marked with serial numbers. These graphics<br />
appear on the overlay layer of the image.<br />
The Counting command also generates an entry in the auxiliary window Measurement.<br />
The example below illustrates the process.<br />
3.8.9 Grid Lines<br />
Use the Grid commands to draw a lattice on the active image.<br />
The Grid Lines draws a rectangular lattice on the overlay layer of the active image.<br />
3.8.10 Grid Circles<br />
Use the Grid commands to draw a lattice on the active image.<br />
The Grid Circles draws co-centric circles on the overlay layer of the active image.<br />
3.8.11 Grid Options<br />
Use the Grid Options command to specify how grids are to be drawn. The dialog box<br />
below is displayed to assist in defining the parameters for the grid overlay. A grid can<br />
be generated simply by specifying the distance between lines, and a position relative to<br />
Copyright © 2006-2011 Page 103
Change language