INFINITY ANALYZE User's Manual - Spectra Services

More documents

Recommendations

Info

Lumenera INFINITY ANALYZE User’s Manual Release 6.0.0 left button is released, will be connected automatically by a straight line to close the shape. The drawing will be put on the overlay layer of the image. A short text describing the measured area and perimeter will appear in a text box annotation object. Two entries will be appended to the auxiliary window Measurement. One entry is the area, the other is perimeter. The example below illustrates the process. 3.8.3 Polygon Use the Polygon command to measure the area and perimeter of a polygon. Click to specify the vertices of the polygon. After the last vertex has been specified, double-click right button to start (and to complete) the measurement. The polygon will be put on the overlay layer of the image. A short text describing the measured area and perimeter will appear in a text box annotation object. Two entries will be appended to the auxiliary window Measurement. One entry is the area, the other is perimeter. 3.8.4 Circle from 3 Points Use the Circle from 3 Points command to measure the radius of a circle. Page 98 Copyright © 2006-2011
Release 6.0.0 Lumenera INFINITY ANALYZE User’s Manual Click to specify three points. If these points are not collinear, a circle can be unique determined which passes through the three points. The circle will appear on the overlay layer of the image. A short text describing the quantity of its radius will appear in a text box annotation object. A new entry will be made to the auxiliary window Measurement recording the value of the radius. Repeat the above procedure to measure more circles. The example below illustrates the process. 3.8.5 Angle Use the Angle command to measure angles. Click to specify three controlling points. The angle made by the line passing through the 1 st and the 2 nd point, and the line passing the 2 nd and 3 rd point, will be measured. The Angle command, if successfully executed, generates three types of output. The angle will be shown as graphics on the overlay layer. A short description of the angle will appear in a text box annotation object over the image. The auxiliary window Measurement will also have a new entry added. The following example illustrates the process. Copyright © 2006-2011 Page 99
Page 1 and 2:
INFINITY ANALYZE User’s Manual
Page 3 and 4:
Release 6.0.0 Lumenera INFINITY ANA
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Page 13 and 14:
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48: Release 6.0.0 Lumenera INFINITY ANA
Page 97: Release 6.0.0 Lumenera INFINITY ANA
show all

INFINITY ANALYZE User's Manual - Spectra Services

Create successful ePaper yourself

Delete template?

Save as template?