INFINITY ANALYZE User's Manual - Spectra Services
INFINITY ANALYZE User's Manual - Spectra Services
INFINITY ANALYZE User's Manual - Spectra Services
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Lumenera <strong>INFINITY</strong> <strong>ANALYZE</strong><br />
User’s <strong>Manual</strong> Release 6.0.0<br />
Unit and Square Unit abbreviation fields are available to specify<br />
how measurement units are to be presented.<br />
d. Finally, the relationship between microns and your preferred units<br />
of measure are specified in the field to the right of Linear Unit. If<br />
working in microns, then this field is left as 1. If working in any units<br />
other than microns, then the value entered into this field is the<br />
number of microns in one unit of the desired measurements. For<br />
example: enter 25400 in this field in working in inches, or 25,400 if<br />
working in thousands of an inch.<br />
Enter the length of the line, in<br />
microns, not counting<br />
magnification factor.<br />
Enter the nominal<br />
magnification. The<br />
magnification is used in<br />
printing only where the image<br />
appears magnified on paper.<br />
All measurements are done in<br />
microns and have nothing to<br />
do with magnifying factor.<br />
Ying’s comment:<br />
Add description<br />
Ying’s comment:<br />
Add description<br />
Push to close the dialog and<br />
commit the new settings of<br />
system micrometer.<br />
Page 110 Copyright © 2006-2011
Change language