INFINITY ANALYZE User's Manual - Spectra Services
INFINITY ANALYZE User's Manual - Spectra Services
INFINITY ANALYZE User's Manual - Spectra Services
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Release 6.0.0<br />
Lumenera <strong>INFINITY</strong> <strong>ANALYZE</strong><br />
User’s <strong>Manual</strong><br />
Click to specify three points. If these points are not collinear, a circle can be unique<br />
determined which passes through the three points. The circle will appear on the overlay<br />
layer of the image. A short text describing the quantity of its radius will appear in a text<br />
box annotation object. A new entry will be made to the auxiliary window Measurement<br />
recording the value of the radius.<br />
Repeat the above procedure to measure more circles.<br />
The example below illustrates the process.<br />
3.8.5 Angle<br />
Use the Angle command to measure angles.<br />
Click to specify three controlling points. The angle made by the line passing through the<br />
1 st and the 2 nd point, and the line passing the 2 nd and 3 rd point, will be measured.<br />
The Angle command, if successfully executed, generates three types of output. The<br />
angle will be shown as graphics on the overlay layer. A short description of the angle<br />
will appear in a text box annotation object over the image. The auxiliary window<br />
Measurement will also have a new entry added.<br />
The following example illustrates the process.<br />
Copyright © 2006-2011 Page 99
Change language