INFINITY ANALYZE User's Manual - Spectra Services

Lumenera INFINITY ANALYZE
User’s Manual Release 6.0.0
1 Click the thumbnail.
2. Hover over the thumbnail for 2 or more seconds.
3.5.10 Clear All
Use the Clear All command to empty the Field Group.
Equivalent Command
Right click the thumbnail to bring up Field Group Context Menu, and choose Clear All.
Selecting an image in Field Group
1 Click the thumbnail.
2. Hover over the thumbnail for 2 or more seconds.
3.5.11 Show Previous
Use the Show Previous command to display the currently selected image of Field Group
in the active image window and then select the preceding image in Field Group.
For this command to work, the selected image in the Field Group must have the same
numbers of columns and rows of pixels and number of color channels as the active
image, otherwise, the command fails quietly but the internal index will be decremented,
so next time the command is executed it can find the right image to display.
The Show Previous command replaces the image in the active image window by the
selected image in the Field Group. Note that only pictorial data are replaced and the
other layers such as graphical overly are kept intact. This facilitates the comparing of
multiple images.
3.5.12 Show Next
Use the Show Next command to display the currently selected image of Field Group in
the active image window and then select the following image in Field Group.
For this command to work, the selected image in the Field Group must have the same
numbers of columns and rows of pixels and number of color channels as the active
image, otherwise, the command fails quietly but the internal index will be incremented,
so next time the command is executed it can find the right image to display.
Page 64 Copyright © 2006-2011