INFINITY ANALYZE User's Manual - Spectra Services

Lumenera INFINITY ANALYZE
User’s Manual Release 6.0.0
the horizontal and vertical offset of the top left corner of the image with respect to
the top left corner of the printable area of the paper, in millimeters. The offsets
are specified in Displacement for CAP (mm).
• CFP. Under this mode, the active image would be printed if it is not empty. The
image is automatically scaled to fill the width or height of the paper, depending
on aspect ratios of the image and paper. The aspect ratio of the image is kept
constant. If the image could not occupy the whole printable area of the paper, it
will be placed to the top side as far as possible but centered horizontally on the
paper.
Zoom for AAA and CAP
This section specifies a zoom ratio of the images for use with printing under AAA and
CAP modes.
Displacement for CAP (mm)
This section specifies offsets of the image for use with printing under CAP mode. The
origins of the image and paper are their top left corners. Horizontal displacement is
defined as the distance between the leftmost column of the image and the left side of
the paper’s rectangular printable area. Vertical displacement is defined as the distance
between topmost row of the image and the top of the paper’s rectangular printable area.
The distance is measured in millimetres.
The Print Image Layout command is used to configure the printing but it does not initiate
a printing process.
3.1.10 Print Preview
Use the Print Preview command to simulate image printing on computer screen.
In this mode, INFINITY ANALYZE menu, toolbars, auxiliary windows except the Control
Panel are hidden as illustrated below.
Page 32 Copyright © 2006-2011