2013 4 29 ROSEMARY BEACH PROJECT MANUAL.pdf

DAG Architects
12041 Rosemary Beach Owners Center
Rosemary Beach, FL.
C. Finish: Apply Ipe Oil to all surfaces.
2.3 INTERIOR FRAMES AND JAMBS FOR TRANSPARENT FINISH
A. Grade: Premium.
B. Wood Species: Ipe
C. Finish: Apply Ipe Oil to all surfaces.
2.4 WOOD MATERIALS
A. Wood Products: Provide materials that comply with requirements of referenced quality standard
for each type of wood frame and quality grade specified unless otherwise indicated.
2.5 MISCELLANEOUS MATERIALS
A. Exterior Blocking, Shims, and Nailers: Softwood or hardwood lumber, pressure-preservative
treated, kiln dried to less than 15 percent moisture content.
1. Preservative Treatment by Pressure Process: AWPA U1; Use Category UC3b.
a. Kiln dry lumber after treatment to a maximum moisture content of 19 percent.
b. Mark lumber with treatment quality mark of an inspection agency approved by the
American Lumber Standards Committee's (ALSC) Board of Review.
B. Interior Blocking, Shims, and Nailers: Softwood or hardwood lumber , kiln dried to less than
15 percent moisture content.
C. Nails for Exterior Use: stainless steel.
D. Screws for Exterior Use: stainless steel.
E. Provide self-drilling screws for metal-framing supports.
F. Anchors: Select material, type, size, and finish required for each substrate for secure anchorage.
Provide metal expansion sleeves or expansion bolts for post-installed anchors. Use nonferrousmetal
or hot-dip galvanized anchors and inserts at inside face of exterior walls and at floors.
G. Adhesives: Do not use adhesives that contain urea formaldehyde.
2.6 FABRICATION
A. Fabricate wood frames to dimensions, profiles, and details indicated. Ease edges to radius
indicated for the following:
WOOD FRAMES 064800 - 2