2013 4 29 ROSEMARY BEACH PROJECT MANUAL.pdf

DAG Architects Inc.
12041 Rosemary Beach Owners Center
Rosemary Beach Fl.
3.8.2 Install floor drains at low points of surface areas to be drained, or as indicated. Set tops of drains
flush with finished floor.
3.8.3 Install drain flashing collar or flange so that no leakage occurs between drain and adjoining
flooring. Maintain integrity of waterproof membranes, where penetrated.
3.8.4 Position drains so that they are accessible and easy to maintain.
3.9 Connection of Trap Primers: Connect trap primers as indicated, and in accordance with
manufacturer's installation instructions. Pitch piping towards drain trap, minimum of 1/8" per foot
(1%). Adjust trap primer for proper flow.
3.10 Piping Runouts to Fixtures: Provide soil and waste piping runouts to plumbing fixtures and
drains, with approved trap, of sizes indicated, but in no case smaller than required by Florida
Building Code-Plumbing.
3.11 Test, clean, flush, and inspect soil and waste piping in accordance with requirements of Division-
22 Basic Plumbing Materials and Methods section "Testing, Cleaning and Sterilization of Piping
Systems".
END OF SECTION 22 13 16
SOIL, WASTE, AND VENT SYSTEM 22 13 16 - 4/4