2013 4 29 ROSEMARY BEACH PROJECT MANUAL.pdf

DAG Architects Inc.
12041 Rosemary Beach Owners Center
Rosemary Beach, FL.
SECTION 01 11 00 – PRODUCT EVALUATION AND APPROVAL
PART 1 - GENERAL
1.1 SUMMARY
A. This Section includes the following:
1. Florida Product Evaluation and Approval.
1.2 REFERENCES
A. Florida Statute 553.842
B. Florida Administrative Code 9B-72
C. Definition: Product evaluation and approval system that applies statewide to concurrent with the
Florida Building Code.
1.3 RESPONSIBILITY
A. The Contractor is responsible for providing products approved by the State of Florida with
approval numbers. Do not use products that do not have a Florida approval number.
1.4 SUBMITTAL
A. Submit a copy of the approved product schedule, (attached at the end of this section), to the
Architect within thirty (30) days after project has been awarded. In addition to State
requirements comply with the requirements of the local jurisdiction of the project.
B. Submit the following product approval specification sheet, or local jurisdiction form to obtain
building permits.
1.5 CATEGORIES
A. General: Products, methods, or systems of construction, used in the exterior envelope of a
building must be approved by the Building Department. The products covered are those
products, methods or systems that affect the structural integrity of the building envelope,
including but not limited to the following categories.
1. Panel Walls.
2. Exterior Doors
3. Roofing Products.
4. Skylights
5. Windows
6. Shutters
7. Structural Components
8. New and Innovative Building Envelope Products.
PRODUCT APPROVAL SPECIFICATION SHEET 01 11 00 - 1/6