2013 4 29 ROSEMARY BEACH PROJECT MANUAL.pdf

DAG Architects
12041 Rosemary Beach Owners Center
Rosemary Beach, FL.
1. Warranty Period: one (1) year from date of Substantial Completion.
PART 2 - PRODUCTS
2.1 MANUFACTURERS
A. Basis-of-Design Product: Subject to compliance with requirements, provide or comparable
product by one of the following:
1. .KONE Inc. ECOSTAR (BASIS OF DESIGN)
2. .Schindler Elevator Corp.
3. .ThyssenKrupp Elevator.
2.2 PERFORMANCE REQUIREMENTS
A. Regulatory Requirements: Comply with ASME A17.1/CSA B44.
B. Florida Elevator Code.
C. Accessibility Requirements: Comply Florida Building Code and with Section 407 in the U.S.
Architectural & Transportation Barriers Compliance Board's ADA-ABA Accessibility
Guidelines and with ICC A117.1.
2.3 ELEVATORS
A. Elevator System, General: Manufacturer's standard elevator systems. Unless otherwise
indicated, manufacturer's standard components shall be used, as included in standard elevator
systems and as required for complete system.
B. Elevator Description:
1. Elevator Number(s): ‘ONE’ as shown on Drawings>.
2. Machine Location: Machine room (see drawings)
3. Machine Type: Geared traction.
4. Rated Load: 2500 lb.
5. Rated Speed: 150 fpm.
6. Operation System: Selective-collective automatic operation.
7. Auxiliary Operations:
a. Battery-powered lowering.
b. Inside Depth: Refer to the drawings.
c. Inside Height: 92 inches to underside of ceiling.
d. Front Walls (Return Panels): Satin stainless steel, No. 4 finish.
e. Car Fixtures: Satin stainless steel, No. 4 finish.
f. Side and Rear Wall Panels: Satin stainless steel, No. 4 finish.
g. Door Faces (Interior): Polished stainless steel, No. 8 finish.
h. Ceiling: Polished stainless steel, No. 8 finish.
i. Handrails: 1-1/2 inches round satin stainless steel, No. 4 finish, at sides
j. Floor prepared to receive Resilient Tile Flooring LVT.
ELECTRIC TRACTION ELEVATORS 142100 - 2