en/ACS800-04/U4 Hardware Manuals - VAE ProSys sro
en/ACS800-04/U4 Hardware Manuals - VAE ProSys sro
en/ACS800-04/U4 Hardware Manuals - VAE ProSys sro
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
32Cabinet heatersUse a cabinet heater if there is a risk of cond<strong>en</strong>sation in the cabinet. Although theprimary function of the heater is to keep the air dry, it may also be required forheating at low temperatures. Wh<strong>en</strong> placing the heater, follow the instructionsprovided by its manufacturer.Mounting the optional control panelThe optional control panel CDP312R is factory assembled on the drive module.Thepanel can also be fast<strong>en</strong>ed directly to the cabinet door or to a mounting platform.Installing the control panel directly on the cabinet doorFast<strong>en</strong> the control panel from the back side with two screws of one of the followingtypes:• standard screw with nominal diameter of 4 mm (0.16 in.)• tapping screw with nominal diameter of 4.2 mm (0.17 in.) DIN 7981 C, DIN 7982C, DIN 7983 C or DIN 7976 C• PT screw for thermoplastics with nominal diameter of 4 mm (0.16 in.).View from outside the cabinet doorCabinet door4...8 mm(0.16...0.31 in.)Control panelTight<strong>en</strong>ing torque:1 Nm (0.74 lbf ft)10 mm (0.39 in.)Control panel footprintPlanning the cabinet assembly